Araştırma Makalesi
BibTex RIS Kaynak Göster

FARKLI ALÜMİNYUM ALAŞIMLARINDA BBC2000, BBC2003, BBC2005 VE BBC2008 AKMA KRİTERLERİNİN KARŞILAŞTIRILMASI

Yıl 2019, Cilt: 8 Sayı: 2, 1073 - 1081, 31.07.2019
https://doi.org/10.28948/ngumuh.598051

Öz

   Sonlu elemanlar analiz programlarında
malzemenin elastik ve plastik davranışı doğru tanımlanırsa, sonuçların hata
payı düşmektedir. Başarılı analiz sonuçları elde etmek için önemli
parametrelerden birisi ise akma kriteri seçimidir. Literatürde geliştirilmiş
birçok akma kriteri mevcut iken bazıları sonlu elemanlar analiz programlarına
dahil edilmektedir. Bazı analiz programlarında bu kriterler tanımlıyken (model
parametre değerleri girilerek), bazılarında da programa kod yazarak ilave
edilmektedir. Bu çalışmada BBC2000, BBC2003, BBC2005, BBC2008 akma
kriterlerinin iki farklı alüminyum alaşımındaki model tahminleri
karşılaştırılmıştır. Aynı zamanda BBC2008 akma kriterinde parametre sayısının
etkisi de incelenmiştir. Daha fazla parametreli modelin deney sonuçlarını daha
iyi tahmin ettiği görülmüştür.

Kaynakça

  • [1] OZTURK, F., TOROS, S., KILIC, S., Effects of anisotropic yield functions on prediction of forming limit diagrams of DP600 advanced high strength steel, in: Ishikawa, T., Mori, K.I. (Eds.) 11th International Conference on Technology of Plasticity, ICTP2014 (pp. 760-765), 2014.
  • [2] KILIÇ, S., ÖZTÜRK, F., "Comparison of performances of commercial TWIP900 and DP600 advanced high strength steels in automotive industry", Journal of the Faculty of Engineering and Architecture of Gazi University, 31, 567-578, 2016.
  • [3] KILIC, S., OZTURK, F., SIGIRTMAC, T., TEKIN, G., "Effects of Pre-strain and Temperature on Bake Hardening of TWIP900CR Steel", Journal of Iron and Steel Research, International, 22, 361-365, 2015.
  • [4] KILIÇ, S., KACAR, İ., ÖZTÜRK, F., TOROS, S., "EFFECT OF DIFFERENT OPTIMIZATION METHODS ON THE ESTIMATIONS OF YLD2000 YIELD CRITERION COEFFICIENTS", Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, (Kabul edildi), 2018.
  • [5] BUTUC, M.C., BANABIC, D., BARATA DA ROCHA, A., GRACIO, J.J., FERREIRA DUARTE, J., JURCO, P., COMSA, D.S., "The performance of Yld96 and BBC2000 yield functions in forming limit prediction", Journal of Materials Processing Technology, 125-126, 281-286, 2002.
  • [6] BANABIC, D., WAGNER, S., "Anisotropic behaviour of aluminium alloys sheets", ALUMINIUM DUSSELDORF THEN ISERNHAGEN, 78, 926-929, 2002.
  • [7] BANABIC, D., CAZACU, O., BARLAT, F., COMSA, D.-S., WAGNER, S., SIEGERT, K., "Recent anisotropic yield criteria for sheet metals", Proceedings of the Romanian Academy: Mathematics, physics, technical sciences, information science, 3, 91, 2002.
  • [8] IZADPANAH, S., GHADERI, S.H., GERDOOEI, M., "Material parameters identification procedure for BBC2003 yield criterion and earing prediction in deep drawing", International Journal of Mechanical Sciences, 115-116, 552-563, 2016.
  • [9] TOROS, S., "304L PASLANMAZ ÇELİĞİN ŞEKİLLENDİRME SINIR DİYAGRAMININ BELİRLENMESİNDE ANİZOTROPİ BELİRLEME METODUNUN ETKİSİ", Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 6, 737-751, 2017.
  • [10] EGGERTSEN, P.A., MATTIASSON, K., "On constitutive modeling for springback analysis", International Journal of Mechanical Sciences, 52, 804-818, 2010.
  • [11] BANABIC, D., COMSA, D.-S., BBC2005 Yield Criterion Used in the Numerical Simulation of Sheet Metal Forming Processes, in: 60 Excellent Inventions in Metal Forming (pp. 49-54),Springer, 2015.
  • [12] BANABIC, D., "Advances in Plastic Anisotropy and Forming Limits in Sheet Metal Forming", Journal of Manufacturing Science and Engineering, 138, 090801-090801-090809, 2016.
  • [13] ACHANIC, D., HOPPERSTAD, O.S., LADEMO, O.G., "Behaviour of extruded aluminium alloys under proportional and non-proportional strain paths", Journal of Materials Processing Technology, 209, 4750-4764, 2009.
  • [14] BANABIC, D., COMSA, D.-S., GAWAD, J., Plastic Behaviour of Sheet Metals, in: Multiscale Modelling in Sheet Metal Forming (pp. 1-46),Springer, 2016.
  • [15] BANABIC, D., KUWABARA, T., BALAN, T., COMSA, D.S., JULEAN, D., "Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions", International Journal of Mechanical Sciences, 45, 797-811, 2003.
  • [16] BANABIC, D., ARETZ, H., COMSA, D., PARAIANU, L., "An improved analytical description of orthotropy in metallic sheets", International Journal of Plasticity, 21, 493-512, 2005.
  • [17] BANABIC, D., COMSA, D.S., SESTER, M., SELIG, M., KUBLI, W., MATTIASSON, K., SIGVANT, M., "Influence of constitutive equations on the accuracy of prediction in sheet metal forming simulation", Numisheet, 37-42. 2008.
  • [18] COMSA, D.-S., BANABIC, D., "Plane-stress yield criterion for highly-anisotropic sheet metals", Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET, 43-48. 2008.

COMPARISON OF BBC2000, BBC2003, BBC2005 AND BBC2008 YIELD CRITERIA IN DIFFERENT ALUMINUM ALLOYS

Yıl 2019, Cilt: 8 Sayı: 2, 1073 - 1081, 31.07.2019
https://doi.org/10.28948/ngumuh.598051

Öz

 If the elastic and plastic behavior of the material is correctly defined in the finite element analysis programs, the margin of error reduces. One of the important parameters to obtain successful analysis results is the yield criterion choice. While there are many yield criteria developed in the literature, some of them are included in finite element analysis programs. In some analysis programs while these criteria are defined (by entering the model parameter values) and some are added by writing code to the program. In this study, model estimates of BBC2000, BBC2003, BBC2005, BBC2008 yield criteria are compared in two different aluminum alloys. At the same time, the effect of the parameters number on the BBC2008 yield criterion is examined. It is seen that the more parameters model predicts better the experimental results.

Kaynakça

  • [1] OZTURK, F., TOROS, S., KILIC, S., Effects of anisotropic yield functions on prediction of forming limit diagrams of DP600 advanced high strength steel, in: Ishikawa, T., Mori, K.I. (Eds.) 11th International Conference on Technology of Plasticity, ICTP2014 (pp. 760-765), 2014.
  • [2] KILIÇ, S., ÖZTÜRK, F., "Comparison of performances of commercial TWIP900 and DP600 advanced high strength steels in automotive industry", Journal of the Faculty of Engineering and Architecture of Gazi University, 31, 567-578, 2016.
  • [3] KILIC, S., OZTURK, F., SIGIRTMAC, T., TEKIN, G., "Effects of Pre-strain and Temperature on Bake Hardening of TWIP900CR Steel", Journal of Iron and Steel Research, International, 22, 361-365, 2015.
  • [4] KILIÇ, S., KACAR, İ., ÖZTÜRK, F., TOROS, S., "EFFECT OF DIFFERENT OPTIMIZATION METHODS ON THE ESTIMATIONS OF YLD2000 YIELD CRITERION COEFFICIENTS", Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, (Kabul edildi), 2018.
  • [5] BUTUC, M.C., BANABIC, D., BARATA DA ROCHA, A., GRACIO, J.J., FERREIRA DUARTE, J., JURCO, P., COMSA, D.S., "The performance of Yld96 and BBC2000 yield functions in forming limit prediction", Journal of Materials Processing Technology, 125-126, 281-286, 2002.
  • [6] BANABIC, D., WAGNER, S., "Anisotropic behaviour of aluminium alloys sheets", ALUMINIUM DUSSELDORF THEN ISERNHAGEN, 78, 926-929, 2002.
  • [7] BANABIC, D., CAZACU, O., BARLAT, F., COMSA, D.-S., WAGNER, S., SIEGERT, K., "Recent anisotropic yield criteria for sheet metals", Proceedings of the Romanian Academy: Mathematics, physics, technical sciences, information science, 3, 91, 2002.
  • [8] IZADPANAH, S., GHADERI, S.H., GERDOOEI, M., "Material parameters identification procedure for BBC2003 yield criterion and earing prediction in deep drawing", International Journal of Mechanical Sciences, 115-116, 552-563, 2016.
  • [9] TOROS, S., "304L PASLANMAZ ÇELİĞİN ŞEKİLLENDİRME SINIR DİYAGRAMININ BELİRLENMESİNDE ANİZOTROPİ BELİRLEME METODUNUN ETKİSİ", Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 6, 737-751, 2017.
  • [10] EGGERTSEN, P.A., MATTIASSON, K., "On constitutive modeling for springback analysis", International Journal of Mechanical Sciences, 52, 804-818, 2010.
  • [11] BANABIC, D., COMSA, D.-S., BBC2005 Yield Criterion Used in the Numerical Simulation of Sheet Metal Forming Processes, in: 60 Excellent Inventions in Metal Forming (pp. 49-54),Springer, 2015.
  • [12] BANABIC, D., "Advances in Plastic Anisotropy and Forming Limits in Sheet Metal Forming", Journal of Manufacturing Science and Engineering, 138, 090801-090801-090809, 2016.
  • [13] ACHANIC, D., HOPPERSTAD, O.S., LADEMO, O.G., "Behaviour of extruded aluminium alloys under proportional and non-proportional strain paths", Journal of Materials Processing Technology, 209, 4750-4764, 2009.
  • [14] BANABIC, D., COMSA, D.-S., GAWAD, J., Plastic Behaviour of Sheet Metals, in: Multiscale Modelling in Sheet Metal Forming (pp. 1-46),Springer, 2016.
  • [15] BANABIC, D., KUWABARA, T., BALAN, T., COMSA, D.S., JULEAN, D., "Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions", International Journal of Mechanical Sciences, 45, 797-811, 2003.
  • [16] BANABIC, D., ARETZ, H., COMSA, D., PARAIANU, L., "An improved analytical description of orthotropy in metallic sheets", International Journal of Plasticity, 21, 493-512, 2005.
  • [17] BANABIC, D., COMSA, D.S., SESTER, M., SELIG, M., KUBLI, W., MATTIASSON, K., SIGVANT, M., "Influence of constitutive equations on the accuracy of prediction in sheet metal forming simulation", Numisheet, 37-42. 2008.
  • [18] COMSA, D.-S., BANABIC, D., "Plane-stress yield criterion for highly-anisotropic sheet metals", Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET, 43-48. 2008.
Toplam 18 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Konular Makine Mühendisliği
Bölüm Makine Mühendisliği
Yazarlar

Süleyman Kılıç 0000-0002-1681-9403

Serkan Toros Bu kişi benim 0000-0003-0438-2862

Yayımlanma Tarihi 31 Temmuz 2019
Gönderilme Tarihi 22 Aralık 2018
Kabul Tarihi 29 Mart 2019
Yayımlandığı Sayı Yıl 2019 Cilt: 8 Sayı: 2

Kaynak Göster

APA Kılıç, S., & Toros, S. (2019). FARKLI ALÜMİNYUM ALAŞIMLARINDA BBC2000, BBC2003, BBC2005 VE BBC2008 AKMA KRİTERLERİNİN KARŞILAŞTIRILMASI. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 8(2), 1073-1081. https://doi.org/10.28948/ngumuh.598051
AMA Kılıç S, Toros S. FARKLI ALÜMİNYUM ALAŞIMLARINDA BBC2000, BBC2003, BBC2005 VE BBC2008 AKMA KRİTERLERİNİN KARŞILAŞTIRILMASI. NÖHÜ Müh. Bilim. Derg. Temmuz 2019;8(2):1073-1081. doi:10.28948/ngumuh.598051
Chicago Kılıç, Süleyman, ve Serkan Toros. “FARKLI ALÜMİNYUM ALAŞIMLARINDA BBC2000, BBC2003, BBC2005 VE BBC2008 AKMA KRİTERLERİNİN KARŞILAŞTIRILMASI”. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 8, sy. 2 (Temmuz 2019): 1073-81. https://doi.org/10.28948/ngumuh.598051.
EndNote Kılıç S, Toros S (01 Temmuz 2019) FARKLI ALÜMİNYUM ALAŞIMLARINDA BBC2000, BBC2003, BBC2005 VE BBC2008 AKMA KRİTERLERİNİN KARŞILAŞTIRILMASI. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 8 2 1073–1081.
IEEE S. Kılıç ve S. Toros, “FARKLI ALÜMİNYUM ALAŞIMLARINDA BBC2000, BBC2003, BBC2005 VE BBC2008 AKMA KRİTERLERİNİN KARŞILAŞTIRILMASI”, NÖHÜ Müh. Bilim. Derg., c. 8, sy. 2, ss. 1073–1081, 2019, doi: 10.28948/ngumuh.598051.
ISNAD Kılıç, Süleyman - Toros, Serkan. “FARKLI ALÜMİNYUM ALAŞIMLARINDA BBC2000, BBC2003, BBC2005 VE BBC2008 AKMA KRİTERLERİNİN KARŞILAŞTIRILMASI”. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 8/2 (Temmuz 2019), 1073-1081. https://doi.org/10.28948/ngumuh.598051.
JAMA Kılıç S, Toros S. FARKLI ALÜMİNYUM ALAŞIMLARINDA BBC2000, BBC2003, BBC2005 VE BBC2008 AKMA KRİTERLERİNİN KARŞILAŞTIRILMASI. NÖHÜ Müh. Bilim. Derg. 2019;8:1073–1081.
MLA Kılıç, Süleyman ve Serkan Toros. “FARKLI ALÜMİNYUM ALAŞIMLARINDA BBC2000, BBC2003, BBC2005 VE BBC2008 AKMA KRİTERLERİNİN KARŞILAŞTIRILMASI”. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, c. 8, sy. 2, 2019, ss. 1073-81, doi:10.28948/ngumuh.598051.
Vancouver Kılıç S, Toros S. FARKLI ALÜMİNYUM ALAŞIMLARINDA BBC2000, BBC2003, BBC2005 VE BBC2008 AKMA KRİTERLERİNİN KARŞILAŞTIRILMASI. NÖHÜ Müh. Bilim. Derg. 2019;8(2):1073-81.

download