Araştırma Makalesi
BibTex RIS Kaynak Göster

Yıl 2023, Cilt: 7 Sayı: 2, 47 - 53, 15.12.2023

Nesrin Adıgüzel Muhammet Özgeriş Fadime Şimşek Büşra Bayraktar

Öz

Kaynakça

  • [1]Pourahmad S, Pesteei SM, Ravaeei H, Khorasani S. Experimental study of heat transfer and pressure drop analysis of the air/water two-phase flow in a double tube heat exchanger equipped with dual twisted tape turbulator: Simultaneous usage of active and passive methods. Journal of Energy Storage(2021) 44:103408. doi:10.1016/j.est.2021.103408.
  • [2]Salhi J-E, Zarrouk T, Merrouni AA, Salhi M, Salhi N. Numerical investigations of the impact of a novel turbulator configuration on the performances enhancement of heat exchangers. Journal of Energy Storage(2022) 46:103813. doi:10.1016/j.est.2021.103813.
  • [3]Xiong Q, Izadi M, Shokri rad M, Shehzad SA, Mohammed HA. 3D Numerical Study of Conical and Fusiform Turbulators for Heat Transfer Improvement in a Double-Pipe Heat Exchanger. International Journal of Heat and Mass Transfer(2021) 170:120995. doi:10.1016/j.ijheatmasstransfer.2021.120995.
  • [4]Nirgude VV, Sahu SK. Heat transfer enhancement in nucleate pool boiling using laser processed surfaces: Effect of laser wavelength and power variation. Thermochimica Acta(2020) 694:178788. doi:10.1016/j.tca.2020.178788.
  • [5]Armatsombat A, Chinsuwan A. Heat transfer behavior of the immersed tubes and solid circulation rate of a conventional U type loop-seal with an in-line tube bundle in the recycle chamber with and without side aeration at the walls. Powder Technology(2020) 369:114–126. doi:10.1016/j.powtec.2020.05.022.
  • [6]Padmanabhan S, Yuvatejeswar Reddy O, Venkata Ajith Kumar Yadav, Kanta, Bupesh Raja VK, Palanikumar K. Heat transfer analysis of double tube heat exchanger with helical inserts. Materials Today: Proceedings(2021) 46:3588–3595. doi:10.1016/j.matpr.2021.01.337.
  • [7]Raghulnath D, Saravanan K, Lakshmanan P, Ranjith Kuma M, Hariharan KB. Performance analysis of heat transfer parameters in shell and tube heat exchanger with circumferential turbulator. Materials Today: Proceedings(2021) 37:3721–3724. doi:10.1016/j.matpr.2020.10.189.
  • [8]Vivekanandan M, Saravanan G, Vijayan V, Gopalakrishnan K, Phani Krishna J. Experimental and CFD investigation of spiral tube heat exchanger. Materials Today: Proceedings(2021) 37:3689–3696. doi:10.1016/j.matpr.2020.09.824.
  • [9]Bahiraei M, Mazaheri N, Hanooni M. Employing a novel crimped-spiral rib inside a triple-tube heat exchanger working with a nanofluid for solar thermal applications: Irreversibility characteristics. Sustainable Energy Technologies and Assessments(2022) 52:102080. doi:10.1016/j.seta.2022.102080.
  • [10]Lara-Montaño OD, Gómez-Castro FI, Gutiérrez-Antonio C. Comparison of the performance of different metaheuristic methods for the optimization of shell-and-tube heat exchangers. Computers & Chemical Engineering(2021) 152:107403. doi:10.1016/j.compchemeng.2021.107403.
  • [11]Marzouk SA, Abou Al-Sood MM, El-Said EMS, El-Fakharany MK. Effect of wired nails circular–rod inserts on tube side performance of shell and tube heat exchanger: Experimental study. Applied Thermal Engineering(2020) 167:114696. doi:10.1016/j.applthermaleng.2019.114696.
  • [12]Yıldız A, Ersöz MA. Chevron Tipi Bir Isı Değiştiricisinin Termodinamik Analizi [Thermodynamic Analysis of a Chevron Type Heat Exchanger]. Tesisat Mühendisliği(2014)(144).
  • [13]Gomaa A, Halim MA, Elsaid AM. Experimental and numerical investigations of a triple concentric-tube heat exchanger. Applied Thermal Engineering(2016) 99:1303–1315. doi:10.1016/j.applthermaleng.2015.12.053.
  • [14]Turgut E, Yardımcı U. Comprehensive analysis of the performance of the coaxial heat exchanger with turbulators. International Journal of Thermal Sciences(2022) 176:107502. doi:10.1016/j.ijthermalsci.2022.107502.
  • [15]Nakhchi ME, Hatami M, Rahmati M. Experimental investigation of performance improvement of double-pipe heat exchangers with novel perforated elliptic turbulators. International Journal of Thermal Sciences(2021) 168:107057. doi:10.1016/j.ijthermalsci.2021.107057.
  • [16]Büyükaşik C. Computational heat and fluid flow analysis of an innovativeplate for a plate heat exchanger. Fen Bilimleri Enstitüsü; ÇUKUROVA ÜNİVERSİTESİ; Diğer. Adana (2020). Available from: https://acikbilim.yok.gov.tr/handle/20.500.12812/123200.
  • [17]Yehia MG, Attia AAA, Abdelatif OE, Khalil EE. Heat transfer and friction characteristics of shell and tube heat exchanger with multi inserted swirl vanes. Applied Thermal Engineering(2016) 102:1481–1491. doi:10.1016/j.applthermaleng.2016.03.095.
  • [18]Luo C, Song K. Thermal performance enhancement of a double-tube heat exchangerwith novel twisted annulus formed by counter-twisted oval tubes. International Journal of Thermal Sciences(2021) 164:106892. doi:10.1016/j.ijthermalsci.2021.106892.

Design of A Counter-Flow Shell and Tube Heat Exchanger: Effect of The Number ofPlates on Heat Transfer and Determination Thereof

Yıl 2023, Cilt: 7 Sayı: 2, 47 - 53, 15.12.2023

Nesrin Adıgüzel Muhammet Özgeriş Fadime Şimşek Büşra Bayraktar

Öz

In this study, the variation of heat transfer characteristics was observed by means of plates attached to the copper tube of a counter-flow shell and tube heat exchanger designed in SolidWorks. The heat exchanger body, i.e. the shell, and the plates were defined as made of 304 stainless steel, and the thin-wall inner tube as copper. With respect to the number of plates and the positioning thereof, the outlet temperatures of the hot and cold fluids were examined and compared in terms of heat transfer. As a result of the data obtained from the analyses, the heat transfer was shown to increase linearly with the number of plates to a certain number, and the optimum number of plates was determined to be 7, having increased the heat transfer by 24% -52% compared to the case without plates. The positioning of the plates, on the other hand, found to have an insignificant effect.

Anahtar Kelimeler

Shell and tube heat exchanger Number of plates eat transfer CFD

Kaynakça

  • [1]Pourahmad S, Pesteei SM, Ravaeei H, Khorasani S. Experimental study of heat transfer and pressure drop analysis of the air/water two-phase flow in a double tube heat exchanger equipped with dual twisted tape turbulator: Simultaneous usage of active and passive methods. Journal of Energy Storage(2021) 44:103408. doi:10.1016/j.est.2021.103408.
  • [2]Salhi J-E, Zarrouk T, Merrouni AA, Salhi M, Salhi N. Numerical investigations of the impact of a novel turbulator configuration on the performances enhancement of heat exchangers. Journal of Energy Storage(2022) 46:103813. doi:10.1016/j.est.2021.103813.
  • [3]Xiong Q, Izadi M, Shokri rad M, Shehzad SA, Mohammed HA. 3D Numerical Study of Conical and Fusiform Turbulators for Heat Transfer Improvement in a Double-Pipe Heat Exchanger. International Journal of Heat and Mass Transfer(2021) 170:120995. doi:10.1016/j.ijheatmasstransfer.2021.120995.
  • [4]Nirgude VV, Sahu SK. Heat transfer enhancement in nucleate pool boiling using laser processed surfaces: Effect of laser wavelength and power variation. Thermochimica Acta(2020) 694:178788. doi:10.1016/j.tca.2020.178788.
  • [5]Armatsombat A, Chinsuwan A. Heat transfer behavior of the immersed tubes and solid circulation rate of a conventional U type loop-seal with an in-line tube bundle in the recycle chamber with and without side aeration at the walls. Powder Technology(2020) 369:114–126. doi:10.1016/j.powtec.2020.05.022.
  • [6]Padmanabhan S, Yuvatejeswar Reddy O, Venkata Ajith Kumar Yadav, Kanta, Bupesh Raja VK, Palanikumar K. Heat transfer analysis of double tube heat exchanger with helical inserts. Materials Today: Proceedings(2021) 46:3588–3595. doi:10.1016/j.matpr.2021.01.337.
  • [7]Raghulnath D, Saravanan K, Lakshmanan P, Ranjith Kuma M, Hariharan KB. Performance analysis of heat transfer parameters in shell and tube heat exchanger with circumferential turbulator. Materials Today: Proceedings(2021) 37:3721–3724. doi:10.1016/j.matpr.2020.10.189.
  • [8]Vivekanandan M, Saravanan G, Vijayan V, Gopalakrishnan K, Phani Krishna J. Experimental and CFD investigation of spiral tube heat exchanger. Materials Today: Proceedings(2021) 37:3689–3696. doi:10.1016/j.matpr.2020.09.824.
  • [9]Bahiraei M, Mazaheri N, Hanooni M. Employing a novel crimped-spiral rib inside a triple-tube heat exchanger working with a nanofluid for solar thermal applications: Irreversibility characteristics. Sustainable Energy Technologies and Assessments(2022) 52:102080. doi:10.1016/j.seta.2022.102080.
  • [10]Lara-Montaño OD, Gómez-Castro FI, Gutiérrez-Antonio C. Comparison of the performance of different metaheuristic methods for the optimization of shell-and-tube heat exchangers. Computers & Chemical Engineering(2021) 152:107403. doi:10.1016/j.compchemeng.2021.107403.
  • [11]Marzouk SA, Abou Al-Sood MM, El-Said EMS, El-Fakharany MK. Effect of wired nails circular–rod inserts on tube side performance of shell and tube heat exchanger: Experimental study. Applied Thermal Engineering(2020) 167:114696. doi:10.1016/j.applthermaleng.2019.114696.
  • [12]Yıldız A, Ersöz MA. Chevron Tipi Bir Isı Değiştiricisinin Termodinamik Analizi [Thermodynamic Analysis of a Chevron Type Heat Exchanger]. Tesisat Mühendisliği(2014)(144).
  • [13]Gomaa A, Halim MA, Elsaid AM. Experimental and numerical investigations of a triple concentric-tube heat exchanger. Applied Thermal Engineering(2016) 99:1303–1315. doi:10.1016/j.applthermaleng.2015.12.053.
  • [14]Turgut E, Yardımcı U. Comprehensive analysis of the performance of the coaxial heat exchanger with turbulators. International Journal of Thermal Sciences(2022) 176:107502. doi:10.1016/j.ijthermalsci.2022.107502.
  • [15]Nakhchi ME, Hatami M, Rahmati M. Experimental investigation of performance improvement of double-pipe heat exchangers with novel perforated elliptic turbulators. International Journal of Thermal Sciences(2021) 168:107057. doi:10.1016/j.ijthermalsci.2021.107057.
  • [16]Büyükaşik C. Computational heat and fluid flow analysis of an innovativeplate for a plate heat exchanger. Fen Bilimleri Enstitüsü; ÇUKUROVA ÜNİVERSİTESİ; Diğer. Adana (2020). Available from: https://acikbilim.yok.gov.tr/handle/20.500.12812/123200.
  • [17]Yehia MG, Attia AAA, Abdelatif OE, Khalil EE. Heat transfer and friction characteristics of shell and tube heat exchanger with multi inserted swirl vanes. Applied Thermal Engineering(2016) 102:1481–1491. doi:10.1016/j.applthermaleng.2016.03.095.
  • [18]Luo C, Song K. Thermal performance enhancement of a double-tube heat exchangerwith novel twisted annulus formed by counter-twisted oval tubes. International Journal of Thermal Sciences(2021) 164:106892. doi:10.1016/j.ijthermalsci.2021.106892.
Toplam 18 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mikro ve Nanosistemler
Bölüm Research Articles
Yazarlar

Nesrin Adıgüzel

Muhammet Özgeriş

Fadime Şimşek

Büşra Bayraktar

Yayımlanma Tarihi 15 Aralık 2023
Gönderilme Tarihi 3 Mayıs 2023
Yayımlandığı Sayı Yıl 2023 Cilt: 7 Sayı: 2

Kaynak Göster

APA Adıgüzel, N., Özgeriş, M., Şimşek, F., Bayraktar, B. (2023). Design of A Counter-Flow Shell and Tube Heat Exchanger: Effect of The Number ofPlates on Heat Transfer and Determination Thereof. International Journal of Innovative Research and Reviews, 7(2), 47-53.
 Kapak Resmi İndir