Araştırma Makalesi
Numerical Analysis of Heat Transfer of Hot Oil and Cold Water Fluids in a Concentric Type Heat Exchanger with Ansys Fluent
Öz
In this study, the heat transfer performance of a trunk pipe heat exchanger using motor oil as hot fluid and cold water as cold fluid was analyzed by a compu-tational fluid dynamic (An-sys Fluent) program. The engine oil heat exchanger at different temperature rang-es (70C) and at different velocity (0.1m/s). Same case, the cold water at dif-ferent temperature ranges of the heat exchanger (5C) and different speed (1m/s) enters. The numerical re-sults and mesh validations are shown below.
Anahtar Kelimeler
Kaynakça
- [1] Galeazzo FCC, Miura RY, Gut JAW, Tadini CC. Experimental and numerical heat transfer in a plate heat exchanger. Chemical Engineering Science (2006) 61(21):7133–7138. doi:10.1016/j.ces.2006.07.029.
- [2] Mussard M, Nydal OJ. Comparison of oil and aluminum-based heat storage charged with a small-scale solar parabolic trough. Applied Thermal Engineering (2013) 58(1-2):146–154. doi:10.1016/j.applthermaleng.2013.03.059.
- [3] Pacio J, Singer C, Wetzel T, Uhlig R. Thermodynamic evalua-tion of liquid metals as heat transfer fluids in concentrated so-lar power plants. Applied Thermal Engineering (2013) 60(1-2):295–302. doi:10.1016/j.applthermaleng.2013.07.010.
- [4] Terekhov VI, Pakhomov MA. Numerical study of heat transfer in a laminar mist flow over a isothermal flat plate. Internatio-nal Journal of Heat and Mass Transfer (2002) 45(10):2077–2085. doi:10.1016/S0017-9310(01)00318-0.
- [5] Diaz GC. Simulation and Control of Heat Exchangers Using Artificial Neural Networks. PhD Thesis. University of Notre Dame. Notre Dame, Indiana (2000) [cited 2018 Dec 17]. 179 p. Available from: https://pdfs.semanticscholar.org/4e50/8b4823dd65c082be1f4e864df64d8a0fe3d1.pdf.
- [6] Wang Q-W, Lin M, Zeng M. Effect of lateral fin profiles on turbulent flow and heat transfer performance of internally fin-ned tubes. Applied Thermal Engineering (2009) 29(14-15):3006–3013. doi:10.1016/j.applthermaleng.2009.03.016.
Yıl 2018,
Cilt: 2 Sayı: 2, 24 - 27, 15.12.2018
Öz
Kaynakça
- [1] Galeazzo FCC, Miura RY, Gut JAW, Tadini CC. Experimental and numerical heat transfer in a plate heat exchanger. Chemical Engineering Science (2006) 61(21):7133–7138. doi:10.1016/j.ces.2006.07.029.
- [2] Mussard M, Nydal OJ. Comparison of oil and aluminum-based heat storage charged with a small-scale solar parabolic trough. Applied Thermal Engineering (2013) 58(1-2):146–154. doi:10.1016/j.applthermaleng.2013.03.059.
- [3] Pacio J, Singer C, Wetzel T, Uhlig R. Thermodynamic evalua-tion of liquid metals as heat transfer fluids in concentrated so-lar power plants. Applied Thermal Engineering (2013) 60(1-2):295–302. doi:10.1016/j.applthermaleng.2013.07.010.
- [4] Terekhov VI, Pakhomov MA. Numerical study of heat transfer in a laminar mist flow over a isothermal flat plate. Internatio-nal Journal of Heat and Mass Transfer (2002) 45(10):2077–2085. doi:10.1016/S0017-9310(01)00318-0.
- [5] Diaz GC. Simulation and Control of Heat Exchangers Using Artificial Neural Networks. PhD Thesis. University of Notre Dame. Notre Dame, Indiana (2000) [cited 2018 Dec 17]. 179 p. Available from: https://pdfs.semanticscholar.org/4e50/8b4823dd65c082be1f4e864df64d8a0fe3d1.pdf.
- [6] Wang Q-W, Lin M, Zeng M. Effect of lateral fin profiles on turbulent flow and heat transfer performance of internally fin-ned tubes. Applied Thermal Engineering (2009) 29(14-15):3006–3013. doi:10.1016/j.applthermaleng.2009.03.016.
Toplam 6 adet kaynakça vardır.
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Konular | Mühendislik |
| Bölüm | Research Articles |
| Yazarlar | |
| Yayımlanma Tarihi | 15 Aralık 2018 |
| Gönderilme Tarihi | 11 Eylül 2018 |
| Yayımlandığı Sayı | Yıl 2018 Cilt: 2 Sayı: 2 |
