Araştırma Makalesi
Yıl 2023,
Cilt: 15 Sayı: 3, 95 - 109, 10.11.2023
Öz
Kaynakça
- Xia, M., Takayanagi, H., Kemmochi, K., Analysis of multi-layered filament-wound composite pipes under internal pressure. Composite Structures,53, 483-491, 2001.
- Sulu, Ismail Yasin , Semsettin, Temiz, Failure and stress analysis of internal pressurized composite pipes joined with sleeves.Journal Adhesion Science and Technology, 32 (8), 816-832, 2018.
- Quan, Dong, Alderliesten, René,Dransfeld, Clemens,Tsakoniatis, Ioannis,Benedictus, Rinze, Co-cure joining of epoxy composites with rapidly UV-irradiated PEEK and PPS composites to achieve high structural integrity.Composite Structures, 251, 112595, 2020
- Nguyen, Tuan Hung, Grognec, Philippe Le, Analytical and numerical simplified modeling of a single-lap joint.International Journal of Adhesion and Adhesives, 108,102827, 2021.
- Sulu, Ismail Yasin , Temiz, Semsettin,Mechanical characterization of composite pipe systems joined using different radii pipes subject to internal pressure.Mechanics Based Design of Structures and Machines, 51(1), 566-582, 2023.
- Sun, Guangyong,Wei, Yang,Huo, Xintao,Luo, Quantian,Li, Qing, On quasi-static large deflection of single lap joints under transverse loading.Thin-Walled Structures, 170, 108572, 2022.
- Ma, Guoliang,Wu, Jiayu,Yuan, Hong, Interfacial shear stress analysis in single-lap adhesive joints with similar and dissimilar adherends under dynamic loading.International Journal of Adhesion and Adhesives, 111, 102953, 2021.
- Zou, Tianchun,Fu, Ji,Qin, Jiaxu,Li, Longhui,Liu, Zhihao, Failure analysis of composite-to-titanium single lap adhesive joints subjected to tensile loading.Engineering Failure Analysis, 129, 105734, 2021.
- Shang, X.,Marques, E. A. S.,Carbas, R. J. C.,Barbosa, A. Q.,Jiang, D.,da Silva, L. F. M.,D., Chen,Ju, S., Fracture mechanism of adhesive single-lap joints with composite adherends under quasi-static tension.Composite Structures, 251, 112639, 2020.
- Sahin, Resul , Akpinar, Salih, The effects of adherend thickness on the fatigue strength of adhesively bonded single-lap joints.International Journal of Adhesion and Adhesives, 107, 102845, 2021.
- Huang, Wei, Sun, Lingyu,Liu, Yang,Chu, Yantao,Wang, Jinxi, Effects of low-energy impact at different temperatures on residual properties of adhesively bonded single-lap joints with composites substrates.Composite Structures,267, 113860, 2021.
- Shi, Jia-Wei,Cao, Wen-Hai,Chen, Lei,Li, Ang-Lin, Durability of wet lay-up BFRP single-lap joints subjected to freeze–thaw cycling.Construction and Building Materials, 238, 117664, 2020.
- Lee, H. K.,Pyo, S. H.,Kim, B. R., On joint strengths, peel stresses and failure modes in adhesively bonded double-strap and supported single-lap GFRP joints.Composite Structures, 87, 44–54, 2009.
- Akhavan-Safar, A., Ayatollahi, M. R.,da Silva, L. F. M., Strength prediction of adhesively bonded single lap joints with different bondline thicknesses: A critical longitudinal strain approach.International Journal of Solids and Structures, 109, 189–198, 2017.
- Abdi, H.,Papadopoulos, J.,Nayeb-Hashemi, H.,Vaziri, A., Enhanced elastic-foundation analysis of balanced single lap adhesive joints.International Journal of Adhesion & Adhesives, 72, 80 – 91, 2017.
- Stein, N.,Mardani, H.,Becker, W., An efficient analysis model for functionally graded adhesive single lap joints.International Journal of Adhesion & Adhesives, 70, 117 – 125, 2016.
- Guin,W. E.,Wang, J., Theoretical model of adhesively bonded single lap joints with functionally graded adherents.Engineering Structures, 124, 316 – 332, 2016.
- Sülü,İsmail Yasin,Mechanical behavior of single-lap and double-lap adhesive joined composite parts.Materials Testing, 59(11-12), 1019-1026, 2017.
- Sülü, İsmail Yasin, Mechanical testing and analysis of composite parts adhesively joined under tensile load.Materials Testing, 59(5), 459-465, 2017.
- Sülü,İsmail Yasin,Temiz,Şemsettin, Mechanical behavior of composite parts joined through different processes.Materials Testing, 63, 411-419, 2021.
- Sülü,İsmail Yasin,Mechanical behavior of internal pressurized composite pipes jointed with embedded tubular sleeves.Materials Testing, 59(3),272-277, 2017.
- Sulu,İ. Y.,Temiz, Ş.,Aydin, M. D., Layer effects of multi-layered face to face adhesively bonded composite pipes subjected to internal pressure.Academic Journal of Science, 04(3), 195-202, 2015.
- Wang,B.,Xiong, J.,Wang, X.,Ma, L.,Zhang, G. Q.,Wu, L. Z.,Feng, J. C., Energy absorption efficiency of carbon fiber reinforced polymer laminates under high velocity impact.Materials and Design, 50, 140–148, 2013.
- Salih,A.,Aydin,M. D., 3-D non-linear stress analysis on the adhesively bonded composite joint under bending moment.International Journal of Mechanical Sciences, 81, 149-157,2014.
- Ozel, A.,Yazici, B.,Akpinar, S.,Aydin, M. D.,Temiz,Ş., A study on the strength of adhesively bonded joints with different adherends.Composites Part B: Engineering, 62, 167 – 174, 2014.
Behavior of Composite Parts Adhesively Joined With Single Lap Joint and Intermediated Material Under Tensile Load
Öz
In research, composite parts adhesively joined with single-lap joint (SLJ) and intermediated material under tensile load were examined by finite element analysis (FEA). While T700 Carbon/epoxy was used for composite parts and intermediate material, DP 410 type was preferred for adhesive. The numerical studies were carried out by ANSYS 14.5 based on finite elements method. The von-Mises failure criteria and the Tsai-wu failure criteria were respectively considered for adhesive and composites. The analyses were firstly actualized to determine the failure loads for each parameter situation. The stresses at obtained failure load for each parameter state were investigated. The critical equivalent stresses on adhesive layers were examined and the critical stress lines for length and width was determined. The distributions of normal and shear stresses in all directions were obtained by considering critical stress line on adhesive layers. Similarly, the von-Mises stress distributions were obtained. Considering critical stress lines, the stress distributions on width and length of overlap dimensional were compared. The effects of overlap dimensional, orientation angle and intermediated material on effect of joint zone were investigated.
Anahtar Kelimeler
: Intermediated material finite element analysis orientation angles stress analysis adhesive joint design
Kaynakça
- Xia, M., Takayanagi, H., Kemmochi, K., Analysis of multi-layered filament-wound composite pipes under internal pressure. Composite Structures,53, 483-491, 2001.
- Sulu, Ismail Yasin , Semsettin, Temiz, Failure and stress analysis of internal pressurized composite pipes joined with sleeves.Journal Adhesion Science and Technology, 32 (8), 816-832, 2018.
- Quan, Dong, Alderliesten, René,Dransfeld, Clemens,Tsakoniatis, Ioannis,Benedictus, Rinze, Co-cure joining of epoxy composites with rapidly UV-irradiated PEEK and PPS composites to achieve high structural integrity.Composite Structures, 251, 112595, 2020
- Nguyen, Tuan Hung, Grognec, Philippe Le, Analytical and numerical simplified modeling of a single-lap joint.International Journal of Adhesion and Adhesives, 108,102827, 2021.
- Sulu, Ismail Yasin , Temiz, Semsettin,Mechanical characterization of composite pipe systems joined using different radii pipes subject to internal pressure.Mechanics Based Design of Structures and Machines, 51(1), 566-582, 2023.
- Sun, Guangyong,Wei, Yang,Huo, Xintao,Luo, Quantian,Li, Qing, On quasi-static large deflection of single lap joints under transverse loading.Thin-Walled Structures, 170, 108572, 2022.
- Ma, Guoliang,Wu, Jiayu,Yuan, Hong, Interfacial shear stress analysis in single-lap adhesive joints with similar and dissimilar adherends under dynamic loading.International Journal of Adhesion and Adhesives, 111, 102953, 2021.
- Zou, Tianchun,Fu, Ji,Qin, Jiaxu,Li, Longhui,Liu, Zhihao, Failure analysis of composite-to-titanium single lap adhesive joints subjected to tensile loading.Engineering Failure Analysis, 129, 105734, 2021.
- Shang, X.,Marques, E. A. S.,Carbas, R. J. C.,Barbosa, A. Q.,Jiang, D.,da Silva, L. F. M.,D., Chen,Ju, S., Fracture mechanism of adhesive single-lap joints with composite adherends under quasi-static tension.Composite Structures, 251, 112639, 2020.
- Sahin, Resul , Akpinar, Salih, The effects of adherend thickness on the fatigue strength of adhesively bonded single-lap joints.International Journal of Adhesion and Adhesives, 107, 102845, 2021.
- Huang, Wei, Sun, Lingyu,Liu, Yang,Chu, Yantao,Wang, Jinxi, Effects of low-energy impact at different temperatures on residual properties of adhesively bonded single-lap joints with composites substrates.Composite Structures,267, 113860, 2021.
- Shi, Jia-Wei,Cao, Wen-Hai,Chen, Lei,Li, Ang-Lin, Durability of wet lay-up BFRP single-lap joints subjected to freeze–thaw cycling.Construction and Building Materials, 238, 117664, 2020.
- Lee, H. K.,Pyo, S. H.,Kim, B. R., On joint strengths, peel stresses and failure modes in adhesively bonded double-strap and supported single-lap GFRP joints.Composite Structures, 87, 44–54, 2009.
- Akhavan-Safar, A., Ayatollahi, M. R.,da Silva, L. F. M., Strength prediction of adhesively bonded single lap joints with different bondline thicknesses: A critical longitudinal strain approach.International Journal of Solids and Structures, 109, 189–198, 2017.
- Abdi, H.,Papadopoulos, J.,Nayeb-Hashemi, H.,Vaziri, A., Enhanced elastic-foundation analysis of balanced single lap adhesive joints.International Journal of Adhesion & Adhesives, 72, 80 – 91, 2017.
- Stein, N.,Mardani, H.,Becker, W., An efficient analysis model for functionally graded adhesive single lap joints.International Journal of Adhesion & Adhesives, 70, 117 – 125, 2016.
- Guin,W. E.,Wang, J., Theoretical model of adhesively bonded single lap joints with functionally graded adherents.Engineering Structures, 124, 316 – 332, 2016.
- Sülü,İsmail Yasin,Mechanical behavior of single-lap and double-lap adhesive joined composite parts.Materials Testing, 59(11-12), 1019-1026, 2017.
- Sülü, İsmail Yasin, Mechanical testing and analysis of composite parts adhesively joined under tensile load.Materials Testing, 59(5), 459-465, 2017.
- Sülü,İsmail Yasin,Temiz,Şemsettin, Mechanical behavior of composite parts joined through different processes.Materials Testing, 63, 411-419, 2021.
- Sülü,İsmail Yasin,Mechanical behavior of internal pressurized composite pipes jointed with embedded tubular sleeves.Materials Testing, 59(3),272-277, 2017.
- Sulu,İ. Y.,Temiz, Ş.,Aydin, M. D., Layer effects of multi-layered face to face adhesively bonded composite pipes subjected to internal pressure.Academic Journal of Science, 04(3), 195-202, 2015.
- Wang,B.,Xiong, J.,Wang, X.,Ma, L.,Zhang, G. Q.,Wu, L. Z.,Feng, J. C., Energy absorption efficiency of carbon fiber reinforced polymer laminates under high velocity impact.Materials and Design, 50, 140–148, 2013.
- Salih,A.,Aydin,M. D., 3-D non-linear stress analysis on the adhesively bonded composite joint under bending moment.International Journal of Mechanical Sciences, 81, 149-157,2014.
- Ozel, A.,Yazici, B.,Akpinar, S.,Aydin, M. D.,Temiz,Ş., A study on the strength of adhesively bonded joints with different adherends.Composites Part B: Engineering, 62, 167 – 174, 2014.
Toplam 25 adet kaynakça vardır.
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Konular | Mühendislik |
| Bölüm | Makaleler |
| Yazarlar | |
| Erken Görünüm Tarihi | 29 Ekim 2023 |
| Yayımlanma Tarihi | 10 Kasım 2023 |
| Kabul Tarihi | 24 Temmuz 2023 |
| Yayımlandığı Sayı | Yıl 2023 Cilt: 15 Sayı: 3 |
