Research Article
BibTex RIS Cite

Zeolit ve mermer tozu kullanılarak üretilen CAS seramiklere mekanik aktivasyonun etkisi

Year 2018, Volume: 22 Issue: 2, 680 - 687, 01.04.2018
https://doi.org/10.16984/saufenbilder.321767

Abstract

Bu çalışmada CAS (CaO-Al2O3-SiO2)
seramikleri zeolit, mermer tozu ve alümina tozları kullanılarak; 400 dev/dk ve
600 dev/dk hızlarında mekanik aktivasyon ile üretilmiştir. Aktive edilen tozlar
pres yardımı ile şekillendirildikten sonra 1000
oC-1200oC
sıcaklık aralığında 1-5 saat süre ile sinterlenmiştir. Aktivasyon öncesi ve
sonrası tozların ve sinterlenmiş ürünlerin faz analizi XRD yöntemi ile
belirlenmiş; mikroyapı analizleri ise SEM ile görüntülenmiştir. Aktivasyon
sonrası tozlarda amorflaşma tespit edilirken, aktivasyon hızının artması ile
tane boyutu azalması ile beraber aglomerasyonlaşma da gözlenmiştir. Sinterleme
sonucu gözenekli yapı oluşmuş; sıcaklık 1200
oC’ye çıktığında gözenek
çapı belirgin şekilde artmıştır.

References

  • [1] S. Koç, N. Toplan, K. Yıldız, H.O. Toplan, “Effects of mechanical activation on the non-isothermal kinetics of mullite formation from kaolinite,”. J Therm Anal Calorim.,103(3), 791–796, 2011.
  • [2] Z. Ceganac, Z. Acimovic, Lj. Andric, M. Petrov, S. Mihajlovic, “Mechanical activation of ceramic powders and it’s influence on the quality of the refractory linings,” in proceedings of 3rd BMC, Ohrid, R. Macedonia, 2003, pp. 316-319.
  • [3] A.O. Kurt, “Toz üretim yöntemleri ve sinterleme,” Ders notu, 2004-2010, p.3-4 çevrimiçi: www.aokurt.sakarya.edu.tr/dersler/dersler.htm
  • [4] V.V. Boldyrev, “Mechanochemistry and mechanical activation of solids,” Russian Chemical Reviews, 75 (3), 177-189, 2006.
  • [5] V. Günay, Ş. Yılmaz, “Cam-seramik bilim ve teknolojisi,” Tübitak Malzeme Enstitüsü, Gebze, 2010.
  • [6] Z. Miao, N. Li, W. Yan, “Effect of sintering temperature on the phase composition and microstructure of anorthite–mullite–corundum porous ceramics,” Ceramics International, 40(10), 15795–15799, 2014.
  • [7] S. Banijamali, H.R. Rezaei, B. Eftekhari Yekta, V.K. Marghussian, “Sinterability, crystallization and properties of glass–ceramic tiles belonging to CaF2–CaO–MgO–Al2O3–SiO2 system,” Ceramics International, 33(8), 1557-1561, 2007.
  • [8] T. Tunç, “Doğal zeolitten üretilen kordiyeritin karakterizasyonu,” Yüksek Lisans Tezi, Sakarya Üniversitesi Fen Bilimleri Enstitüsü, 2011.
  • [9] T. Tunç, A.Ş. Demirkıran, “The effects of mechanical activation on the sintering and microstructural properties of cordierite produced from natural zeolite,” Powder Technology, 260, 7-14, 2014.
  • [10] N.V. Boltakova, G.R. Faseeva, R.R. Kabirov, R.M. Nafikov, Yu.A. Zakharov, “Utilization of inorganic industrial wastes in producing construction ceramics. Review of Russian experience for the years 2000–2015,” Waste Management, 60, 230–246, 2017.
  • [11] C. Vakifahmetoglu, “Zeolite decorated highly porous acicular calcium silicate ceramics,” Ceramics International, 40(8), 11925–11932, 2014.
  • [12] K.E. Alyamaç, A.B. Aydın, “Concrete Properties Containing Fine Aggregate Marble Powder,” KSCE Journal of Civil Engineering, 19(7), 2208-2216, 2015.
  • [13] M. Soylu, Ö. Gökkuş, “Türkiye'deki doğal zeolitler ve iyon değişimi uygulamaları,” OHÜ Müh. Bilim. Derg., 6(1), 11-20, 2017.
  • [14] Z. Yang, Y. Liu, C. Yu, X. Gu, N. Xu, “Ball-milled NaA zeolite seeds with submicron size for growth of NaA zeolite membranes,” Journal of Membrane Science, 392–393, 18-28, 2012.
  • [15] L.K. Kazantseva, S.V. Rashchenko, “Optimization of porous heat-insulating ceramics manufacturing from zeolitic rocks,” Ceramics International 42(16), 19259–19265, 2016.
  • [16] A.Y. Buzimov, S.N. Kulkov, E. Kurovics, W. Eckl, S. Pappert, “Influence of mechanical activation on the properties of natural zeolites from Tokaj Mountain,” IOP Conf. Ser.:Mater. Sci. Eng. 175, 012033, 2017.
  • [17] Y. Han, C. Li, C. Bian, S. Li, C-A. Wang, “Porous anorthite ceramics with ultra-low thermal conductivity,” Journal of the European Ceramic Society, 33(13-14), 2573–2578, 2013.
  • [18] C. Li, Y. Han, L. Wu, K. Chen, Li-nan An, “Fabrication and properties of porous anorthite ceramics with modelling pore structure,” Materials Letters 190, 95–98, 2017.
  • [19] M.Göktaş, M. Erdemoğlu, “Aşırı öğütme ile mekanik olarak aktifleştirilmiş atık mermer tozları kullanılarak yapay wollastonit üretimi ve kullanımı,” Madencilik, 53(1-2), 39-42, 2014.
  • [20] R. Sokolář, M. Šveda, “The use of zeolite as fluxing agent for whitewares,” Procedia Engineering, 151, 229-235, 2016.
  • [21] R. de’ Gennaro, P. Cappelletti, G. Cerri, M. de’ Gennaro, M. Dondi, G.Guarini, A. Langella, D. Naimo, “Influence of zeolites on the sintering and technological properties of porcelain stoneware tiles,” Journal of the European Ceramic Society, 23(13), 2237–2245, 2003.
  • [22] S. Liu, G.F. Chen, “Chapter Five - Fabricating Porous Ceramics” in Porous Materials Processing and Applications, 1st ed., UK. Elsevier, 2014, pp 222-223.

Effect of mechanical activation on CAS ceramics from produced using zeolite and marble powder

Year 2018, Volume: 22 Issue: 2, 680 - 687, 01.04.2018
https://doi.org/10.16984/saufenbilder.321767

Abstract

In this
study, CAS (CaO-Al2O3-SiO2) based ceramics were
produced by mechanically activation at speeds of 400 and 600 rpm using zeolite,
marble powders and alumina. The activated powders were sintered at 1000-1200oC
temperature for 1-5 hours after shaped by hydraulic press. Phase analysis of
activated and non-activated powders and sintered products were determined by
XRD method. Scaning electron microscopy (SEM) was used to analyze the
microstructure of samples. After activation amorphization was detected in the
powders, while agglomeration was observed with the increase of the activation
rate and the decrease of the grain size. As a result of sintering, a porous
structure was formed; when the temperature went up to 1200 oC, the pore
sizes increased noticeably.

References

  • [1] S. Koç, N. Toplan, K. Yıldız, H.O. Toplan, “Effects of mechanical activation on the non-isothermal kinetics of mullite formation from kaolinite,”. J Therm Anal Calorim.,103(3), 791–796, 2011.
  • [2] Z. Ceganac, Z. Acimovic, Lj. Andric, M. Petrov, S. Mihajlovic, “Mechanical activation of ceramic powders and it’s influence on the quality of the refractory linings,” in proceedings of 3rd BMC, Ohrid, R. Macedonia, 2003, pp. 316-319.
  • [3] A.O. Kurt, “Toz üretim yöntemleri ve sinterleme,” Ders notu, 2004-2010, p.3-4 çevrimiçi: www.aokurt.sakarya.edu.tr/dersler/dersler.htm
  • [4] V.V. Boldyrev, “Mechanochemistry and mechanical activation of solids,” Russian Chemical Reviews, 75 (3), 177-189, 2006.
  • [5] V. Günay, Ş. Yılmaz, “Cam-seramik bilim ve teknolojisi,” Tübitak Malzeme Enstitüsü, Gebze, 2010.
  • [6] Z. Miao, N. Li, W. Yan, “Effect of sintering temperature on the phase composition and microstructure of anorthite–mullite–corundum porous ceramics,” Ceramics International, 40(10), 15795–15799, 2014.
  • [7] S. Banijamali, H.R. Rezaei, B. Eftekhari Yekta, V.K. Marghussian, “Sinterability, crystallization and properties of glass–ceramic tiles belonging to CaF2–CaO–MgO–Al2O3–SiO2 system,” Ceramics International, 33(8), 1557-1561, 2007.
  • [8] T. Tunç, “Doğal zeolitten üretilen kordiyeritin karakterizasyonu,” Yüksek Lisans Tezi, Sakarya Üniversitesi Fen Bilimleri Enstitüsü, 2011.
  • [9] T. Tunç, A.Ş. Demirkıran, “The effects of mechanical activation on the sintering and microstructural properties of cordierite produced from natural zeolite,” Powder Technology, 260, 7-14, 2014.
  • [10] N.V. Boltakova, G.R. Faseeva, R.R. Kabirov, R.M. Nafikov, Yu.A. Zakharov, “Utilization of inorganic industrial wastes in producing construction ceramics. Review of Russian experience for the years 2000–2015,” Waste Management, 60, 230–246, 2017.
  • [11] C. Vakifahmetoglu, “Zeolite decorated highly porous acicular calcium silicate ceramics,” Ceramics International, 40(8), 11925–11932, 2014.
  • [12] K.E. Alyamaç, A.B. Aydın, “Concrete Properties Containing Fine Aggregate Marble Powder,” KSCE Journal of Civil Engineering, 19(7), 2208-2216, 2015.
  • [13] M. Soylu, Ö. Gökkuş, “Türkiye'deki doğal zeolitler ve iyon değişimi uygulamaları,” OHÜ Müh. Bilim. Derg., 6(1), 11-20, 2017.
  • [14] Z. Yang, Y. Liu, C. Yu, X. Gu, N. Xu, “Ball-milled NaA zeolite seeds with submicron size for growth of NaA zeolite membranes,” Journal of Membrane Science, 392–393, 18-28, 2012.
  • [15] L.K. Kazantseva, S.V. Rashchenko, “Optimization of porous heat-insulating ceramics manufacturing from zeolitic rocks,” Ceramics International 42(16), 19259–19265, 2016.
  • [16] A.Y. Buzimov, S.N. Kulkov, E. Kurovics, W. Eckl, S. Pappert, “Influence of mechanical activation on the properties of natural zeolites from Tokaj Mountain,” IOP Conf. Ser.:Mater. Sci. Eng. 175, 012033, 2017.
  • [17] Y. Han, C. Li, C. Bian, S. Li, C-A. Wang, “Porous anorthite ceramics with ultra-low thermal conductivity,” Journal of the European Ceramic Society, 33(13-14), 2573–2578, 2013.
  • [18] C. Li, Y. Han, L. Wu, K. Chen, Li-nan An, “Fabrication and properties of porous anorthite ceramics with modelling pore structure,” Materials Letters 190, 95–98, 2017.
  • [19] M.Göktaş, M. Erdemoğlu, “Aşırı öğütme ile mekanik olarak aktifleştirilmiş atık mermer tozları kullanılarak yapay wollastonit üretimi ve kullanımı,” Madencilik, 53(1-2), 39-42, 2014.
  • [20] R. Sokolář, M. Šveda, “The use of zeolite as fluxing agent for whitewares,” Procedia Engineering, 151, 229-235, 2016.
  • [21] R. de’ Gennaro, P. Cappelletti, G. Cerri, M. de’ Gennaro, M. Dondi, G.Guarini, A. Langella, D. Naimo, “Influence of zeolites on the sintering and technological properties of porcelain stoneware tiles,” Journal of the European Ceramic Society, 23(13), 2237–2245, 2003.
  • [22] S. Liu, G.F. Chen, “Chapter Five - Fabricating Porous Ceramics” in Porous Materials Processing and Applications, 1st ed., UK. Elsevier, 2014, pp 222-223.
There are 22 citations in total.

Details

Primary Language Turkish
Subjects Material Production Technologies
Journal Section Research Articles
Authors

Zafer Yavuz Merkit

Cansu Özarslan This is me

Bahadır Aydın

Nil Toplan

Publication Date April 1, 2018
Submission Date June 15, 2017
Acceptance Date March 23, 2018
Published in Issue Year 2018 Volume: 22 Issue: 2

Cite

APA Merkit, Z. Y., Özarslan, C., Aydın, B., Toplan, N. (2018). Zeolit ve mermer tozu kullanılarak üretilen CAS seramiklere mekanik aktivasyonun etkisi. Sakarya University Journal of Science, 22(2), 680-687. https://doi.org/10.16984/saufenbilder.321767
AMA Merkit ZY, Özarslan C, Aydın B, Toplan N. Zeolit ve mermer tozu kullanılarak üretilen CAS seramiklere mekanik aktivasyonun etkisi. SAUJS. April 2018;22(2):680-687. doi:10.16984/saufenbilder.321767
Chicago Merkit, Zafer Yavuz, Cansu Özarslan, Bahadır Aydın, and Nil Toplan. “Zeolit Ve Mermer Tozu kullanılarak üretilen CAS Seramiklere Mekanik Aktivasyonun Etkisi”. Sakarya University Journal of Science 22, no. 2 (April 2018): 680-87. https://doi.org/10.16984/saufenbilder.321767.
EndNote Merkit ZY, Özarslan C, Aydın B, Toplan N (April 1, 2018) Zeolit ve mermer tozu kullanılarak üretilen CAS seramiklere mekanik aktivasyonun etkisi. Sakarya University Journal of Science 22 2 680–687.
IEEE Z. Y. Merkit, C. Özarslan, B. Aydın, and N. Toplan, “Zeolit ve mermer tozu kullanılarak üretilen CAS seramiklere mekanik aktivasyonun etkisi”, SAUJS, vol. 22, no. 2, pp. 680–687, 2018, doi: 10.16984/saufenbilder.321767.
ISNAD Merkit, Zafer Yavuz et al. “Zeolit Ve Mermer Tozu kullanılarak üretilen CAS Seramiklere Mekanik Aktivasyonun Etkisi”. Sakarya University Journal of Science 22/2 (April 2018), 680-687. https://doi.org/10.16984/saufenbilder.321767.
JAMA Merkit ZY, Özarslan C, Aydın B, Toplan N. Zeolit ve mermer tozu kullanılarak üretilen CAS seramiklere mekanik aktivasyonun etkisi. SAUJS. 2018;22:680–687.
MLA Merkit, Zafer Yavuz et al. “Zeolit Ve Mermer Tozu kullanılarak üretilen CAS Seramiklere Mekanik Aktivasyonun Etkisi”. Sakarya University Journal of Science, vol. 22, no. 2, 2018, pp. 680-7, doi:10.16984/saufenbilder.321767.
Vancouver Merkit ZY, Özarslan C, Aydın B, Toplan N. Zeolit ve mermer tozu kullanılarak üretilen CAS seramiklere mekanik aktivasyonun etkisi. SAUJS. 2018;22(2):680-7.