Research Article
BibTex RIS Cite

Angular solar relations analysis of a flat plate solar collector in Benin City metropolis

Year 2020, Volume: 2 Issue: 2, 67 - 77, 26.06.2020

Abstract

Abstract: The sun is one of the major sources of energy, the distance, position and rotation of the sun and the earth are obtained for proper collector design.
The declination angles, zenith angles, solar azimuth angles and the incident angles of Benin City, Edo State where obtained considering the ambient conditions, longitude and latitudes of site under consideration. As a result of this the radiation on a tilted surface were obtained for more enhance flat plate solar collector design.

References

  • 5.0 REFERENCES Bena, B. and R. J. Fuller. 2002. Natural convection solar dryer with biomass back up heater. Journal of Solar Energy, 72 (1): 75-83. Duffie, J.A. and Beckman, W.A. (2013): Solar Engineering of Thermal Processes. John Wiley and Sons, inc., New York.
  • Foster, Robert, Majed Ghassemi and Alma Cota. (2010): Solar energy: renewable energy and the enviroment. Boca Raton: CRC press.
  • Goswami, D. Yogi, Frank Kreith and Jan F. Kreider. (1999): Principles of solar engineering. 2nd. Philadelphia: Taylor & Francis.
  • Iloeje, O. C. 1993. Design, operation and performance of a solar rice dryer. In proc. 2nd Workshop on ‘‘SDTAI’’, Nsukka, Nigeria, 24-27 November.
  • Klein, S.A (1977): Calculation of monthly average insolation on tilted surfaces, solar energy laboratory, University of Wisconsin-Madison, Madison, WI 53706, USA.
  • National Centre for Energy and Environment (NCEE), University of Benin, Edo State Nigeria (2017).
  • Nielsen, R. 2005. Solar Radiation. http://home.iprimus.com.au/nielsens/.
  • Sharma, A., C. R. Chen, and V. Nguyen. 2009. Solar energy drying systems: a review. Renewable and Sustainable Energy Review, 13(6-7):1185-1210.
Year 2020, Volume: 2 Issue: 2, 67 - 77, 26.06.2020

Abstract

References

  • 5.0 REFERENCES Bena, B. and R. J. Fuller. 2002. Natural convection solar dryer with biomass back up heater. Journal of Solar Energy, 72 (1): 75-83. Duffie, J.A. and Beckman, W.A. (2013): Solar Engineering of Thermal Processes. John Wiley and Sons, inc., New York.
  • Foster, Robert, Majed Ghassemi and Alma Cota. (2010): Solar energy: renewable energy and the enviroment. Boca Raton: CRC press.
  • Goswami, D. Yogi, Frank Kreith and Jan F. Kreider. (1999): Principles of solar engineering. 2nd. Philadelphia: Taylor & Francis.
  • Iloeje, O. C. 1993. Design, operation and performance of a solar rice dryer. In proc. 2nd Workshop on ‘‘SDTAI’’, Nsukka, Nigeria, 24-27 November.
  • Klein, S.A (1977): Calculation of monthly average insolation on tilted surfaces, solar energy laboratory, University of Wisconsin-Madison, Madison, WI 53706, USA.
  • National Centre for Energy and Environment (NCEE), University of Benin, Edo State Nigeria (2017).
  • Nielsen, R. 2005. Solar Radiation. http://home.iprimus.com.au/nielsens/.
  • Sharma, A., C. R. Chen, and V. Nguyen. 2009. Solar energy drying systems: a review. Renewable and Sustainable Energy Review, 13(6-7):1185-1210.
There are 8 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section Research Articles
Authors

Eghosa Omo-oghogho

Aniekan Ikpe 0000-0001-9069-9676

Publication Date June 26, 2020
Acceptance Date May 6, 2020
Published in Issue Year 2020 Volume: 2 Issue: 2

Cite

APA Omo-oghogho, E., & Ikpe, A. (2020). Angular solar relations analysis of a flat plate solar collector in Benin City metropolis. International Journal of Engineering and Innovative Research, 2(2), 67-77.

88x31.png

This work is licensed under a Creative Commons Attribution 4.0 International License