Research Article
BibTex RIS Cite
Year 2023, Volume: 7 Issue: 2, 169 - 174, 31.08.2023
https://doi.org/10.46519/ij3dptdi.1246831

Abstract

References

  • 1. Friedrich-Karl, B., Hans Josef, D., Ji, P., Sebastian S., Bo, W., “A comparison of one-way and two-way coupling methods for numerical analysis of fluid-structure interactions”, Journal of Applied Mathematics, Vol 2011, 2011.
  • 2. Gu, Y., Pei, J., Yuan, S., Xing, L., Stephen, C., Zhang, F., Wang, X., “Effects of blade thickness on hydraulic performance and structural dynamic characteristics of high-power coolant pump at overload condition”, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol 232, Issue 8, 2018.
  • 3. Lee, K., Huque, Z., Kommalapati, R., Han, S.E., “The Evaluation of Aerodynamic Interaction of Wind Blade Using Fluid Structure Interaction Method”, Journal of Clean Energy Technologies, Vol 3, Issue 4, Pages 270-275, 2015.
  • 4. Gong, B.L., Jia, X.J., Wang, G.C., Liu, Z.W., “Study on application of CAE in a centrifugal compressor impeller”, Advanced Materials Research (AMR), Vol. 787, Pages 594-599, 2013. 5. ISO 5389 (2005) Turbo compressor- performance test code second edition, 2005.
  • 6. Zheng, X., Ding, C., “Effect of temperature and pressure on stress of impeller in axial-centrifugal combined compressor”, Advances in Mechanical Engineering, Vol 8, Issue 6, Pages 1-11, 2016.
  • 7. Zheng X, Jin L, Du T, Gan B, Liu F, Qian H., “Effect of temperature on the strength of a centrifugal compressor impeller for a turbocharger”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol 227, Issue 5, Pages 896-904, 2012.
  • 8. ISO 5167 (2003) Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full-Part 4: Venturi tubes, 2003.

INVESTIGATION OF STRESSES ON IMPELLER BLADES BY COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSES

Year 2023, Volume: 7 Issue: 2, 169 - 174, 31.08.2023
https://doi.org/10.46519/ij3dptdi.1246831

Abstract

This paper discusses how stresses on the impeller blades are affected by the temperature, pressure, and blade thicknesses. During operation, the impeller experiences many kinds of stresses caused by thermal, fluid, and mechanical effect. These may deform the impeller blades if the stresses are too high. The impeller used in this case study was provided by HAUS Centrifuge Technologies and this impeller was damaged in the field during the operation. Six different blade thicknesses were structurally analyzed, and the Von-Mises stresses were compared to the impeller material yield strength. The impeller with the least stress was then selected to perform the FSI analysis. It was then manufactured, and a performance test was performed using the ISO 5389 in a test facility. From the CFD results, it was observed that the polytropic efficiency and the discharge temperature was affected by the change in blade thickness. It was concluded that an increase in blade thickness reduces the stresses acting on the blade.

References

  • 1. Friedrich-Karl, B., Hans Josef, D., Ji, P., Sebastian S., Bo, W., “A comparison of one-way and two-way coupling methods for numerical analysis of fluid-structure interactions”, Journal of Applied Mathematics, Vol 2011, 2011.
  • 2. Gu, Y., Pei, J., Yuan, S., Xing, L., Stephen, C., Zhang, F., Wang, X., “Effects of blade thickness on hydraulic performance and structural dynamic characteristics of high-power coolant pump at overload condition”, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol 232, Issue 8, 2018.
  • 3. Lee, K., Huque, Z., Kommalapati, R., Han, S.E., “The Evaluation of Aerodynamic Interaction of Wind Blade Using Fluid Structure Interaction Method”, Journal of Clean Energy Technologies, Vol 3, Issue 4, Pages 270-275, 2015.
  • 4. Gong, B.L., Jia, X.J., Wang, G.C., Liu, Z.W., “Study on application of CAE in a centrifugal compressor impeller”, Advanced Materials Research (AMR), Vol. 787, Pages 594-599, 2013. 5. ISO 5389 (2005) Turbo compressor- performance test code second edition, 2005.
  • 6. Zheng, X., Ding, C., “Effect of temperature and pressure on stress of impeller in axial-centrifugal combined compressor”, Advances in Mechanical Engineering, Vol 8, Issue 6, Pages 1-11, 2016.
  • 7. Zheng X, Jin L, Du T, Gan B, Liu F, Qian H., “Effect of temperature on the strength of a centrifugal compressor impeller for a turbocharger”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol 227, Issue 5, Pages 896-904, 2012.
  • 8. ISO 5167 (2003) Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full-Part 4: Venturi tubes, 2003.
Year 2023, Volume: 7 Issue: 2, 169 - 174, 31.08.2023
https://doi.org/10.46519/ij3dptdi.1246831

Abstract

References

  • 1. Friedrich-Karl, B., Hans Josef, D., Ji, P., Sebastian S., Bo, W., “A comparison of one-way and two-way coupling methods for numerical analysis of fluid-structure interactions”, Journal of Applied Mathematics, Vol 2011, 2011.
  • 2. Gu, Y., Pei, J., Yuan, S., Xing, L., Stephen, C., Zhang, F., Wang, X., “Effects of blade thickness on hydraulic performance and structural dynamic characteristics of high-power coolant pump at overload condition”, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol 232, Issue 8, 2018.
  • 3. Lee, K., Huque, Z., Kommalapati, R., Han, S.E., “The Evaluation of Aerodynamic Interaction of Wind Blade Using Fluid Structure Interaction Method”, Journal of Clean Energy Technologies, Vol 3, Issue 4, Pages 270-275, 2015.
  • 4. Gong, B.L., Jia, X.J., Wang, G.C., Liu, Z.W., “Study on application of CAE in a centrifugal compressor impeller”, Advanced Materials Research (AMR), Vol. 787, Pages 594-599, 2013. 5. ISO 5389 (2005) Turbo compressor- performance test code second edition, 2005.
  • 6. Zheng, X., Ding, C., “Effect of temperature and pressure on stress of impeller in axial-centrifugal combined compressor”, Advances in Mechanical Engineering, Vol 8, Issue 6, Pages 1-11, 2016.
  • 7. Zheng X, Jin L, Du T, Gan B, Liu F, Qian H., “Effect of temperature on the strength of a centrifugal compressor impeller for a turbocharger”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol 227, Issue 5, Pages 896-904, 2012.
  • 8. ISO 5167 (2003) Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full-Part 4: Venturi tubes, 2003.
There are 7 citations in total.

Details

Primary Language English
Subjects Mechanical Engineering
Journal Section Research Article
Authors

İsmail Böğrekci 0000-0002-9494-5405

Pınar Demircioğlu 0000-0003-1375-5616

Berkay Sert 0000-0003-2267-5407

Ahmet Gögebakan 0000-0002-8356-4607

Mujtaba Abbakar 0000-0002-3500-7515

Publication Date August 31, 2023
Submission Date February 2, 2023
Published in Issue Year 2023 Volume: 7 Issue: 2

Cite

APA Böğrekci, İ., Demircioğlu, P., Sert, B., Gögebakan, A., et al. (2023). INVESTIGATION OF STRESSES ON IMPELLER BLADES BY COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSES. International Journal of 3D Printing Technologies and Digital Industry, 7(2), 169-174. https://doi.org/10.46519/ij3dptdi.1246831
AMA Böğrekci İ, Demircioğlu P, Sert B, Gögebakan A, Abbakar M. INVESTIGATION OF STRESSES ON IMPELLER BLADES BY COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSES. IJ3DPTDI. August 2023;7(2):169-174. doi:10.46519/ij3dptdi.1246831
Chicago Böğrekci, İsmail, Pınar Demircioğlu, Berkay Sert, Ahmet Gögebakan, and Mujtaba Abbakar. “INVESTIGATION OF STRESSES ON IMPELLER BLADES BY COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSES”. International Journal of 3D Printing Technologies and Digital Industry 7, no. 2 (August 2023): 169-74. https://doi.org/10.46519/ij3dptdi.1246831.
EndNote Böğrekci İ, Demircioğlu P, Sert B, Gögebakan A, Abbakar M (August 1, 2023) INVESTIGATION OF STRESSES ON IMPELLER BLADES BY COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSES. International Journal of 3D Printing Technologies and Digital Industry 7 2 169–174.
IEEE İ. Böğrekci, P. Demircioğlu, B. Sert, A. Gögebakan, and M. Abbakar, “INVESTIGATION OF STRESSES ON IMPELLER BLADES BY COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSES”, IJ3DPTDI, vol. 7, no. 2, pp. 169–174, 2023, doi: 10.46519/ij3dptdi.1246831.
ISNAD Böğrekci, İsmail et al. “INVESTIGATION OF STRESSES ON IMPELLER BLADES BY COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSES”. International Journal of 3D Printing Technologies and Digital Industry 7/2 (August 2023), 169-174. https://doi.org/10.46519/ij3dptdi.1246831.
JAMA Böğrekci İ, Demircioğlu P, Sert B, Gögebakan A, Abbakar M. INVESTIGATION OF STRESSES ON IMPELLER BLADES BY COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSES. IJ3DPTDI. 2023;7:169–174.
MLA Böğrekci, İsmail et al. “INVESTIGATION OF STRESSES ON IMPELLER BLADES BY COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSES”. International Journal of 3D Printing Technologies and Digital Industry, vol. 7, no. 2, 2023, pp. 169-74, doi:10.46519/ij3dptdi.1246831.
Vancouver Böğrekci İ, Demircioğlu P, Sert B, Gögebakan A, Abbakar M. INVESTIGATION OF STRESSES ON IMPELLER BLADES BY COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSES. IJ3DPTDI. 2023;7(2):169-74.

download

International Journal of 3D Printing Technologies and Digital Industry is lisenced under Creative Commons Atıf-GayriTicari 4.0 Uluslararası Lisansı