Research Article
BibTex RIS Cite
Year 2022, Volume: 9 Issue: 4, 490 - 499, 31.12.2022
https://doi.org/10.54287/gujsa.1193927

Abstract

Supporting Institution

Akdeniz University

References

  • Akhavan Kazemi, K., Eren, O., & Rezaei, A. R. (2015). Some mechanical properties of normal and recycled aggregate concretes. Sci Iran A, 22(6), 1972-1980.
  • Akkaoui, A., Caré, S., & Vandamme, M. (2017). Experimental and micromechanical analysis of the elastic properties of wood-aggregate concrete Construction and Building Materials, 134, 346-357. doi:10.1016/j.conbuildmat.2016.12.084
  • Bdeir, L. M. H. (2012). Study Some Mechanical Properties of Mortar with Sawdust as a Partially Replacement of Sand. Anbar J Eng S., 5(1), 22-30.
  • Corinaldesi, V., Mazzoli, A., & Siddique, R. (2016). Characterization of lightweight mortars containing wood processing by-products waste. Construction and Building Materials, 123, 281-289. doi:10.1016/j.conbuildmat.2016.07.011
  • Dhinakaran, G., & Sreekanth, B. (2018). Physical, mechanical, and durability properties of ternary blend concrete. Sci Iran A, 25(5), 2440-2450. doi:10.24200/sci.2017.4210
  • Gloria, M. Y. R., & Filho, R. D. T. (2016, April 27-29). Influence of the Wood Shavings/Cement Ratio on Lightweight Wood Shavings-Cement Based Composites. In: Proceedings of the 6th Amazon & Pacific Green Materials Congress and Sustainable Construction Materials LAT-RILEM Conference (pp. 365-374), Colombia.
  • Gulmez, N., & Kockal, N. U. (2021). Effects of iron powder on properties of geopolymers subjected to different curing regimes. Indian J Eng Mater S., 28(4), 393-408.
  • Gupta, T., Sharma, R. K., & Chaudhary, S. (2015). Influence of waste tyre rubbers on strength and carbonation of concrete. Sci Iran A, 22(4), 1481-1489.
  • Kockal, N. U. (2013). Effects of elevated temperature and re-curing on the properties of mortars containing industrial waste materials. Iran J Sci Technol., 37(C1), 67-76.
  • Kockal, N. U. (2015). Behavior of mortars produced with construction wastes exposed to different treatments. Indian J Eng Mater S., 22(2), 203-214.
  • Kockal, N. U. (2016). Investigation about the effect of different fine aggregates on physical properties of mortars. Construction and Building Materials, 124, 816-825 doi:10.1016/j.conbuildmat.2016.08.008
  • Mohammed, B. S., Abdullahi, M., & Hoong, C.K. (2014). Statistical models for concrete containing wood chipping as partial replacement to fine aggregate. Construction and Building Materials, 55, 13-19. doi:10.1016/j.conbuildmat.2014.01.021
  • Momoh, E. O., & Osofero, A. I. (2020). Recent developments in the application of oil palm fibers in cement composites. Front. Struct. Civ. Eng., 14(1), 94-108. doi:10.1007/s11709-019-0576-9
  • Mostonejad, D., Noorpour, S., Noorpour, M., Karbati Asl, R., Sadeghi Balkanlouc, V., & Karbati Asl, A. (2017). Effects of petrochemical wastes on the properties of concrete. Sci Iran A, 24(3), 1017-1026. doi:10.24200/sci.2017.4085
  • Nazmul Huda, Md., Bin Jumat, M. Z., Saiful Islam, A. B. M., & Rahman Soeb, M. (2016). Influence of palm oil factory wastes for green lightweight concrete. Revista de la Construcción (Journal of Construction), 15(3), 133-139. doi:10.4067/S0718-915X2016000300013
  • Sashidhar, C., & Rao, H. S. (2010, August 25-27). Durability Studies on Concrete with Wood Ash Additive. In: Proceedings of the 35th Conference on Our World in Concrete & Structures (pp 1-6), Singapore.
  • Sadiku, N. A. (2015). Utilizing wood wastes as reinforcement in wood cement composite bricks. J Fac Forestry Istanbul University, 65(2), 31-37. doi:10.17099/jffiu.80051
  • Taoukil, D., El Bouardi, A., Sick, F., Mimet, A., Ezbakhe, H., & Ajzoul, T. (2013). Moisture content influence on the thermal conductivity of wood–concrete composite. Construction and Building Materials, 48, 104-115. doi:10.1016/j.conbuildmat.2013.06.067
  • Thandavamoorthy, T. S. (2016). Wood Waste as Coarse Aggregate in the Production of Concrete. Eur J Environ Civ Eng., 20(2), 125-141. doi:10.1080/19648189.2015.1016631
  • Udoeyo, F. F., Inyang, H., Young, D. T., & Oparadu, E. E. (2006). Potential of Wood Waste Ash as an Additive in Concrete. J Mater Civil Eng., 18(4), 605-611. doi:10.1061/(ASCE)0899-1561(2006)18:4(605)

Engineering Properties of Lightweight Mortars Containing Wood Waste Particles

Year 2022, Volume: 9 Issue: 4, 490 - 499, 31.12.2022
https://doi.org/10.54287/gujsa.1193927

Abstract

Utilization of wood waste particles (WWP) is important for environmental and economic concern. This study focuses on the behavior of mortars having WWP with various amounts. Incorporation of WWP brings about the advantages such as decrease in the mass and cost of the mortar. In the present study, the proportions of the wood waste particles replacing the crushed sand in the mortars by volume were 0, 10, 20, 30 and 40 %. Physical, mechanical and capillary absorption properties have been investigated. In addition, microstructure of the mortars has been examined with optical microscope. As compared to control specimen, dry bulk density decreased from 2.2 to 1.5 kg/m3, apparent porosity increased about 2 folds, and water absorption increased about 4 folds, for sample in which 40 % of crushed sand was replaced with WWP. Mechanical values reduced with increasing WWP amount. On the other hand, during compressive and flexural strength tests, samples containing WWP presented a gradual decrease in strength, thus they exhibited a more ductile behavior.

References

  • Akhavan Kazemi, K., Eren, O., & Rezaei, A. R. (2015). Some mechanical properties of normal and recycled aggregate concretes. Sci Iran A, 22(6), 1972-1980.
  • Akkaoui, A., Caré, S., & Vandamme, M. (2017). Experimental and micromechanical analysis of the elastic properties of wood-aggregate concrete Construction and Building Materials, 134, 346-357. doi:10.1016/j.conbuildmat.2016.12.084
  • Bdeir, L. M. H. (2012). Study Some Mechanical Properties of Mortar with Sawdust as a Partially Replacement of Sand. Anbar J Eng S., 5(1), 22-30.
  • Corinaldesi, V., Mazzoli, A., & Siddique, R. (2016). Characterization of lightweight mortars containing wood processing by-products waste. Construction and Building Materials, 123, 281-289. doi:10.1016/j.conbuildmat.2016.07.011
  • Dhinakaran, G., & Sreekanth, B. (2018). Physical, mechanical, and durability properties of ternary blend concrete. Sci Iran A, 25(5), 2440-2450. doi:10.24200/sci.2017.4210
  • Gloria, M. Y. R., & Filho, R. D. T. (2016, April 27-29). Influence of the Wood Shavings/Cement Ratio on Lightweight Wood Shavings-Cement Based Composites. In: Proceedings of the 6th Amazon & Pacific Green Materials Congress and Sustainable Construction Materials LAT-RILEM Conference (pp. 365-374), Colombia.
  • Gulmez, N., & Kockal, N. U. (2021). Effects of iron powder on properties of geopolymers subjected to different curing regimes. Indian J Eng Mater S., 28(4), 393-408.
  • Gupta, T., Sharma, R. K., & Chaudhary, S. (2015). Influence of waste tyre rubbers on strength and carbonation of concrete. Sci Iran A, 22(4), 1481-1489.
  • Kockal, N. U. (2013). Effects of elevated temperature and re-curing on the properties of mortars containing industrial waste materials. Iran J Sci Technol., 37(C1), 67-76.
  • Kockal, N. U. (2015). Behavior of mortars produced with construction wastes exposed to different treatments. Indian J Eng Mater S., 22(2), 203-214.
  • Kockal, N. U. (2016). Investigation about the effect of different fine aggregates on physical properties of mortars. Construction and Building Materials, 124, 816-825 doi:10.1016/j.conbuildmat.2016.08.008
  • Mohammed, B. S., Abdullahi, M., & Hoong, C.K. (2014). Statistical models for concrete containing wood chipping as partial replacement to fine aggregate. Construction and Building Materials, 55, 13-19. doi:10.1016/j.conbuildmat.2014.01.021
  • Momoh, E. O., & Osofero, A. I. (2020). Recent developments in the application of oil palm fibers in cement composites. Front. Struct. Civ. Eng., 14(1), 94-108. doi:10.1007/s11709-019-0576-9
  • Mostonejad, D., Noorpour, S., Noorpour, M., Karbati Asl, R., Sadeghi Balkanlouc, V., & Karbati Asl, A. (2017). Effects of petrochemical wastes on the properties of concrete. Sci Iran A, 24(3), 1017-1026. doi:10.24200/sci.2017.4085
  • Nazmul Huda, Md., Bin Jumat, M. Z., Saiful Islam, A. B. M., & Rahman Soeb, M. (2016). Influence of palm oil factory wastes for green lightweight concrete. Revista de la Construcción (Journal of Construction), 15(3), 133-139. doi:10.4067/S0718-915X2016000300013
  • Sashidhar, C., & Rao, H. S. (2010, August 25-27). Durability Studies on Concrete with Wood Ash Additive. In: Proceedings of the 35th Conference on Our World in Concrete & Structures (pp 1-6), Singapore.
  • Sadiku, N. A. (2015). Utilizing wood wastes as reinforcement in wood cement composite bricks. J Fac Forestry Istanbul University, 65(2), 31-37. doi:10.17099/jffiu.80051
  • Taoukil, D., El Bouardi, A., Sick, F., Mimet, A., Ezbakhe, H., & Ajzoul, T. (2013). Moisture content influence on the thermal conductivity of wood–concrete composite. Construction and Building Materials, 48, 104-115. doi:10.1016/j.conbuildmat.2013.06.067
  • Thandavamoorthy, T. S. (2016). Wood Waste as Coarse Aggregate in the Production of Concrete. Eur J Environ Civ Eng., 20(2), 125-141. doi:10.1080/19648189.2015.1016631
  • Udoeyo, F. F., Inyang, H., Young, D. T., & Oparadu, E. E. (2006). Potential of Wood Waste Ash as an Additive in Concrete. J Mater Civil Eng., 18(4), 605-611. doi:10.1061/(ASCE)0899-1561(2006)18:4(605)
There are 20 citations in total.

Details

Primary Language English
Journal Section Civil Engineering
Authors

Niyazi Uğur Koçkal 0000-0001-7324-5277

Erdem Çamurlu 0000-0003-3170-4492

Publication Date December 31, 2022
Submission Date October 24, 2022
Published in Issue Year 2022 Volume: 9 Issue: 4

Cite

APA Koçkal, N. U., & Çamurlu, E. (2022). Engineering Properties of Lightweight Mortars Containing Wood Waste Particles. Gazi University Journal of Science Part A: Engineering and Innovation, 9(4), 490-499. https://doi.org/10.54287/gujsa.1193927